15
4. CONTROLS – THE FRONT PANEL
BIAS adjustment
BIAS regulators and corresponding LED array for each power tube.
Remote control receiver
To ensure optimum operation of the IR remote control, do not
cover this window.
Status indicators
Power
indicates that the unit is switched on.
Protection
Red LED lights up when the electronic protection
system has switched the amplifier off in response
to an amplifier fault (see chapter 6.1).
Soft-start
Lights up during the soft-start process immediately
after switch-on. This LED extinguishes after about
20 – 30 seconds, when soft-start has been
completed (see chapter 6.2).
Front Ch.
Illuminates when multichannel-bypass function is
on (see chapter 6.4).
Volume control
Remote controlled motorized potentiometer.
