Octave V 110 SE, Owner'S Manual

Page: 9 / 38

10
3. GETTING STARTED
3.1. Unpack and check the contents of the box.
Scope of delivery
 V 110 SE
 1 set power tubes with tube layout diagram
 2 pc driver tubes for modifying the damping factor

Power cord (3-core cable with 3-pin plug)
 Remote control

2 screwdrivers: 1 x 2 mm flat-bladed screwdriver for adjusting the bias
1 x 2,5 mm Allen key for removing the cover

Owner's manual with warranty card

Cloth and gloves
3.2. Removing the grille
Procedure


For your own safety, make sure that the amplifier is not connected to power outlet
 Completely remove the 4 hexagonal screws using the Allan key supplied. There are 2
screws on each side

Carefully pull the grille upward to remove