Ochsner TERRA 6, Operating And Installation Manual

Page: 19 / 92

INSTALLATION | Appliance installation
982001-TERRA-M2-M4-EN04.1 | www.ochsner.com 19
10. Appliance installation
10.1 Installation of indoor unit
10.1.1 Delivery and transportation
The appliance is delivered on a one-way pallet, wrapped
in film. The appliance casing is assembled on delivery.
i
Information
Should you notice any transportation damage to
the appliance, you must report such damage im-
mediately when the delivery is unloaded. Claims
for transportation damage cannot be made sub-
sequently.
Material damage
»
Protect the appliance from damage by using
transport straps.
»
When transporting, protect the appliance from
impact.
► The appliance is secured to the one-way (recyclable)
pallet of the transport packaging with screws.
► The transport packaging or one-way pallet is suitable
for transportation using a forklift truck.
► For level transportation to the installation location, the
appliance may remain in the transport packaging.
► Leave the appliance in the transport packaging or on
the one-way pallet for lifting and moving by crane or
forklift.
► The standard packaging of the appliance does not
provide protection against the weather or sea water.
► The appliance may be stored and transported only at
temperatures of between -20°C and +45°C.
► The appliance must be stored in its transport
packaging.
i
Information
If the route to the installation location is difficult,
the transport packaging should be removed and
the appliance casing disassembled.
Please note the following when removing the transport
packaging:
»
Remove the transport packaging.
»
Undo and remove the eight woodscrews on the two
transport fixing brackets (left and right) securing the
appliance to the one-way pallet.
11_02_200_214_01_005
11_02_200_214_01_001
»
Use the pre-installed transport aids (2 lifting slings at
the front and 2 lifting handles at the rear) to lift and
transport the appliance.
»
Transport the appliance in an upright position. Over
short distances, you may transport the appliance
carefully at an angle of up to 30°.
Material damage
Note the following points when carrying the appli-
ance with the pre-installed transport aids:
- When lifting and carrying the appliance, make
sure that all 4 transport aids are pulled evenly
and at the same time.
- Ensure that the appliance casing is not dam-
aged during transport.
- The transport aids are not suitable for lifting by
crane.