
OTS_EN | www.ochsner.com 17
Controller description
9.3.2 Main screen for DHW circuits
1 Name DHW circuit
2 Current temperature of DHW circuit
3 Status of heat pump
4 Operating program
5 Menu
6 Time program
7 Weather forecast/location
8 Current outdoor temperature (value measured by
controller)
9.3.3 Name
An individual name can be assigned to each heating cir-
cuit and each DHW circuit. The name is displayed on the
circuit‘s main screen and in the menu.
»
Press and hold the name to change it.
1
Circuit identifier
2 Name
9.3.4 Current temperature of heating circuit/DHW
circuit
Room temperature
sensor installed?
Displayed value
DHW circuit
-
Current DHW tem-
perature
Heating circuit
No
Current target room
temperature
Heating circuit
Yes
Current room tem-
perature
9.3.5 Current relative humidity
If there is a sensor installed for measuring the current rel-
ative humidity, the measured value is shown on the main
screen of the relevant heating circuit.
9.3.6 Status of heat pump
»
Press the Status symbol to view information about
faults and the status of your heat pump.
Colour
Status
Green
The heat pump is running optimally and
smoothly.
Yellow
The heat pump has a fault. The OTS controller
attempts to solve the problem.
The auxiliary heater starts up to cover the
heating/DHW load while the fault remains.
Red
The heat pump has a fault and can no longer
be operated. The OTS controller could not
solve the problem and has locked the system.
Please contact your service partner.
(For more information, see page 48, System
Grey
The heat pump has been switched off manu-
ally.
9.3.7 Menu
Press the Menu symbol to call up the main menu. The
heating system is shown in the main menu. Each heat
consumer (heating circuits, DHW circuits) and each heat
generator (heat pump, electric immersion heater, boiler,
etc.) has its own submenu.
9.3.8 Current DHW temperature
In addition to the current heating circuit temperature, the
current temperature of the DHW circuit is also displayed
in the heating circuit.
Summary of Contents for AIR FALCON 212
