Wireless network management
OCEABridge User Guide
Page 27
User guide
3.6
Configuring the network LED
You may customize the “wireless network” LED so that it shows activity either on the
wireless network or on the cellular network. The LED is identified on the device casing by
the icon.
1.
To configure LED behavior, click on
Network
LED Configuration
.
2.
Use the drop-down list
Show activity for
to select which network you would like the
LED to indicate:
Figure 24 – Configuring the wireless network activity LED
3.
Click on
Save
to record your changes.
4.
Check to make sure that the corresponding LED blinks as expected on your device.
