Wireless network management
OCEABridge User Guide
Page 23
User guide
1.
Click on
General Setup
to change the information as needed:
Figure 18 – Entering WiFi network settings
2.
Click on to enable/disable the WiFi network as appropriate.
3.4
Enabling an existing wireless network
To enable an existing WiFi access point click on
Enable
in the
Network
Wireless
screen.
Figure 19 – Enabling a WiFi network
If you only have one wireless network, then your configuration is complete at this time. You
may connect to the WiFi network using the security key you defined.
If you have several wireless networks, you must configure each one by repeating these
steps.
2
1
1
2
