OCEANS S1 Supersonic, Manual, Page: 8 / 13

8
The display is always on in dive mode, but will dim after
some time of inactivity to save battery life. To temporarily
increase display brightness; turn S1 towards you, or quickly
PRESS
the right side button.
C ONNEC T ION
In case of lost connection between S1 and the Oceans app,
select the
CONNECTION
option to display the onboarding
screen and connect the device again as described in
”CONNECTING”
on page 4.
C OMPA S S
To display the compass view in surface mode, select the
COMPASS
option. For more information on operating the
compass, see
“COMPASS VIEW”
on page 11.
T IME & DAT E
By default, time and date are automatically synced when
connected to the Oceans app. To manually set time and
date, select the
TIME & DATE
option and use S1’s buttons to
edit the values as described by the function hints on the top
section of the display.
A BOU T
The about option displays S1’s device ID, firmware version
number and Bluetooth firmware version.
V IBR AT ION
The
VIBRATION
setting adjusts the power of the haptic
feedback engine used for alerts and warnings while diving.
• HIGH
• MEDIUM
(Default value)
• LOW
DI SP L AY
When diving in darkness or to safe battery life, display
brightness can be adjusted in 3 levels:
100%
(default),
50%
and
20%
.
S U P E R S O N I C
S 1
S W S E N E
S E
C O M PA S S
P R E S S
B U D D Y P I N G
H O L D
20
,1
m
24
,6
m
M A X D E P T H
12
D I V E T I M E
8
°C
NITROX
3 2 / 1 . 4
28
N O D E C O
To keep night vision intact while diving in black water,
enable
NIGHT MODE
to limit the display to red hues.
• BACKLIGHT — Select display brightness and time out
• NIGHT MODE — Enable/disable red night vision mode