X-SERIES
X4 / X8 / X16
.
INSTALL & OPERATION MANUAL
7
4
Installation
4.1 INSTALLING THE LIGHT FIXTURE
Additional items required not supplied by OceanLED:
•
Marine sealant - 3M 4200 or equivalent
•
Cable ties
•
Waterproof cable connectors / Butt splices glue lined heat shrink / Junction Box* (optional)
•
Philips Screwdriver or Pozidrive #2 Screwdriver Bit
•
12.5mm (1/2
”) Hole Saw Cutter
•
Drill Bit for Screws pilot hole
*Optional 4-Way Junction box available from OceanLED. Please contact OceanLED or your representative for further information.
Ensure mounting location is flat and check internally for ease of access or if there is a rib, strut, stringer
or other hull irregularity that may interfere with the installation.
OceanLED recommends dry fitting all products. Before applying sealant, please ensure the surface is clean
of any dust, dirt or grease. When installing, be sure that the light fits the area and secures to the hull using
the appropriate hardware before applying any sealant.
When applying sealant to the light fixture, use OceanLED packaging material such as the light cardboard box
when placing the light on the ground face down to prevent lens damage.
Never use power tools to secure your lights; hand tighten only.
X Series (X4 / X8 / X16)
Kit Includes
X Light
4x Mounting Screws
