Oceanic VEO 1.0, Operating Manual

Page: 21 / 68

21
LOG MODE
The VEO 1.0 will store up to 12 dives in its Log for viewing.
Each dive has 2 or 3 Log screens - Preview, Dive Data, and O2 Data (if a Nitrox dive).
Once the Log is full (12 dives recorded), each subsequent dive will then over write the old-
est dive stored. It is suggested that you transfer the Log's data to your log book at the end
of each day of diving.
Log data will not be lost when the battery is removed/replaced, however, factory service
and calibration will delete the data.
The first dive conducted each time the unit is activated will be #1, therefore there may be
multiple #1 dives in the Log.
Dives are displayed in a reverse sequence that starts with the dive most recently recorded,
back to the oldest one stored. The most recent dive will always be the first shown in the
sequence.
Log Mode can be accessed after activation, prior to the first dive, and 10 minutes after
surfacing from dives. It cannot be accessed during the first 10 minutes on the surface.
To access Log mode and the most recent dive's Preview screen, depress the button for 2
seconds while viewing the Surface Main screen.