Ocean Optics NeoFox, Installation And Operation Manual

Page: 39 / 68

3: Using NeoFox with NeoFox Viewer Software
013-20000-009-02-201510 31

% O2

Converted O2
6. Click Save Settings and Close Window to save the data.
NeoFox Communication Interfaces
You may wish to write programs to interface directly to the NeoFox without using the NeoFox Viewer.
There are a number of ways to do so: Through the NeoFox DLL, through the NeoFox RS232 port (only
NeoFox-GT units with an F or later in the third digit of its serial number support RS232
communications), or through custom USB drivers. See the
NeoFox Communication Interfaces
Engineering Note for more information (see Product-Related Documentation ).
Saving/Restoring Chart Layouts
NeoFox Viewer allows you to save and restore the layout of the displayed charts. The following settings
can be saved and then restored:

X-axis duration

Vertical height settings

Y-axis scale settings

Type(s) of data being displayed on multiple plotting areas within the chart window
Saving a Chart Layout
►
Procedure
1. Select View | Save Graph Layout from the menu.
2. Specify the name of the file where the settings will be saved.
Restoring a Chart Layout
►
Procedure
1. Select View | Restore Graph Layout from the menu.
2. Enter the name of the file containing the saved setting(s).
Saving Settings
►
Procedure
To save these values in the NeoFox Viewer,
1. Navigate to the Advanced Settings screen.
2. Set the Flash Write parameter to Enabled . It will remain displayed as Enabled briefly before
reverting to Disabled.