Chapter 3
Configuration
Overview
Once the software has been installed, the system has been rebooted, and the hardware has been connected
to the computer, you must configure the software.
Configuring the COM Port with the MFPF
Software
The MFPF unit uses a USB connection with an emulated RS232 port. Before you are permitted to start
the software, you are asked to identify the COM port number of the emulated RS232/USB port.
►
Procedure
To select the COM port for the emulated RS232/USB port,
1.
Click the Windows Start icon.
2.
Select
Control Panel | System
to display the System Properties window.
MFPF-00000-000-02-0606
11
