MNL-1007 REV A
9
Environmental Conditions
The NanoQuest should be kept in environments that maintain the temperature conditions listed below.
Parameter
Value
Units
Operating temperature
-5
–
+40
o
C
Storage temperature
- 20 - +85
o
C
Warm-up
Upon connecting the NanoQuest to the PC via USB, the system takes 15 to 20 minutes to become thermally stabilized. The module is
operational during warm-up. However, repetitive measurements of the same sample while the unit is warming up may lead to slightly
different spectra. If measurements are to be taken during warm-up time, it is recommended to make a background measurement
right before each sample measurement.
