Oce WP28, Operation Manual

Page: 51 / 227

Paper Handling
1-35
Setting the Duplex Path
To use this function, the duplexer must be installed on the printer.
If the paper type is set to
Custom
and the option duplexer is installed on
the printer, you can set whether or not to enable duplex printing as follows.
The default setting is
Enable
.
1
Display the custom paper type (see Creating Custom Paper Type
on page 1-32 ) and press the
>
key.
2
Press the or key repeatedly until
>>Duplex path
appears.
3
Press the
ENTER
key. A blinking question mark (
?
) appears.
4
Select
Enable
or
Disable
using the or key. For details of the
default setting for each paper type, see Paper Type on page 2-12 .
5
Press the
ENTER
key.
6
Press the
MENU
key. The message display returns to
Ready
.
The custom paper type setting is completed.
Option
>>Duplex path
Enable
>>Duplex path
? Enable