Oce VL3200x, User Manual, Page: 59 / 227

Sending a fax
47
5
Dual access
5
You can dial a number, and start scanning the
fax into memory-even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD will show the new
job number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If you get an
Out of Memory
message
while scanning the first page of a fax,
press
Stop/Exit to cancel scanning. If you
get an
Out of Memory
message while
scanning a subsequent page, you can
press
Start to send the pages scanned so
far, or press Stop/Exit to cancel the
operation.
Real Time Transmission
5
When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialing and
sending.
If the memory is full, the machine will send the
document in real time (even if
TX from ADF
is set to
Off
).
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
TX from ADF
to
On
for all documents or
Next Fax:On
for the next fax only.
Note
In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
Sending in real time for all faxes
5
a
Make sure you are in Fax mode.
b
Press Menu , 2 , 2 , 5 .
22.TX Settings
5.TX from ADF
a
On
b
Off
Select ab or OK
c
Press
a
or
b
to choose
On
.
Press OK .
Sending in real time for the next fax
only
5
a
Make sure you are in Fax mode.
b
Press Menu , 2 , 2 , 5 .
22.TX Settings
5.TX from ADF
a On
b Off
Select
ab
or OK
c
Press
a
or
b
to choose
Next Fax:On
.
Press OK .