manualshive.com logo in svg

Oce VL3200x, User Manual, Page: 116 / 227

Share
Download
Oce VL3200x User Manual Download Page 116

104

A

Choosing a location

A

Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put 
the machine near a telephone wall jack and a standard grounded AC power outlet. Choose a 
location where the temperature remains between 50

°

F and 90.5

°

F (10

°

C and 32.5

°

C) and the 

humidity is between 20% to 80% (without condensation.)

WARNING

 

DO NOT expose the machine to direct sunlight, excessive heat, open flames, salty or corrosive 
gasses, moisture or dust.

 

 

DO NOT place the machine near heaters, air conditioners, refrigerators, water, chemicals or 
devices that contain magnets or generate magnetic fields.

 

CAUTION

 

Avoid placing your machine in a high-traffic area.

 

 

DO NOT connect your machine to an AC power outlet controlled by wall switches or automatic 
timers.

 

 

 DO NOT connect your machine to an AC power outlet on the same circuit as large appliances 
or other equipment that might disrupt the power supply.

 

 

Disruption of power can wipe out information in the machine’s memory.

 

 

Avoid interference sources, such as speakers or the base units of cordless telephones.

 

 

DO NOT put objects on top of the machine.

 

Safety and legal

A

 

 

 

Summary of Contents for VL3200x




































































































































































































































Reviews:

No comments