manualshive.com logo in svg

Oce VarioPrint 6180, User Manual

The Oce VarioPrint 6180 is a high-quality printing solution designed for efficient office operations. Enhance productivity with this versatile device by fully understanding its features and functions through the comprehensive user manual available for free download at manualshive.com. Master the Oce VarioPrint 6180, elevate your printing experience.

Share
Download
background image

Print a job ticket

Introduction

Job tickets are used to transfer settings from an application to the printer. It can be convenient to
print a job ticket before printing a job, to get an overview of the main job characteristics.

Job tickets can contain the following information, for example.
• Job name.
• Job owner.
• Job destination.
• Job settings such as the number of sets.
• Required media.

Where to find the [Ticket] button

The [Ticket] button is available at the following locations.
• List of [Printed jobs] (if this function is enabled in the Settings Editor).
• List of [Scheduled jobs].
• List of [Waiting jobs].

Procedure

1.

Press [Jobs].

2.

Go to one of the locations mentioned above.

3.

Touch one or more jobs of which you want to print the job ticket.

4.

Press [Ticket].
The job is sent to the bottom of the list of [Scheduled jobs]. The job may not be immediately
visible in the list of [Scheduled jobs]. You can recognize the job by the prefix @_ in front of the
job name.

Print a job ticket

172

Chapter 9 - Carry out print jobs

Océ VarioPrint 6000 line

Summary of Contents for VarioPrint 6180



















































































































































































































































































































Reviews:

No comments

Related manuals for VarioPrint 6180

NEC NEFAX - 691 B/W Laser Introduction Manual preview
NEFAX - 691 B/W Laser
Brand: NEC Pages: 20
IBM 3160 Introduction And Planning Manual preview
3160
Brand: IBM Pages: 102
Olivetti AR-FN6 Service Manua preview
AR-FN6
Brand: Olivetti Pages: 39
Labau TM200 User Manual preview
TM200
Brand: Labau Pages: 19
EasyThreed X7 Install Instruction preview
X7
Brand: EasyThreed Pages: 4
EASYPRINT Compact CM User Documentation preview
Compact CM
Brand: EASYPRINT Pages: 37
Oki B8300 User Manual preview
B8300
Brand: Oki Pages: 95
Canon LBP-3200 Specifications preview
LBP-3200
Brand: Canon Pages: 4
Canon PIXMA MG3220 series Getting Started Manual preview
PIXMA MG3220 series
Brand: Canon Pages: 4
Canon LBP-800 Getting Started Manual preview
LBP-800
Brand: Canon Pages: 22
Canon Pixma G3020 Series Getting Started preview
Pixma G3020 Series
Brand: Canon Pages: 34
Canon Pixma MG3500 Series Getting Started Manual preview
Pixma MG3500 Series
Brand: Canon Pages: 3
Canon Pixma MG7100 Series Quick Start Manual preview
Pixma MG7100 Series
Brand: Canon Pages: 4
Canon PIXMA G7000 Series Getting Started preview
PIXMA G7000 Series
Brand: Canon Pages: 16
Canon MultiPASS F30 Quick Start Manual preview
MultiPASS F30
Brand: Canon Pages: 10
Canon MultiPASS C545 Quick Start Manual preview
MultiPASS C545
Brand: Canon Pages: 4
Canon IPF670 Basic Manual preview
IPF670
Brand: Canon Pages: 132
Canon iR2230 Printer Manual preview
iR2230
Brand: Canon Pages: 62

Brands by name

Popular brands

Load more brands