Oce VarioPrint 6000 Plus Line, Maintenance Manual

Page: 65 / 102

Lock the OPC unit (left)
Procedure
1. Rotate the metal OPC pulley until the end of the back side of the OPC belt runs near (+/- 0.1 inch)
the arrows of the yellow registration board.
[77] Reposition the OPC belt
2. Use the red handle to push the OPC unit inwards as far as possible.
[78] Move the OPC unit in
3.
Use the service key to turn L5 counter-clockwise into the locked position.
4.
Use the service key to turn L4 clockwise into the locked position.
5.
Use the service key to turn L3 clockwise into the locked position.
6.
Use the service key to turn L2 clockwise into the locked position.
7.
Use the service key to turn L1 clockwise into the locked position.
L1
L2
L3
L4
L5
[79] Lock the OPC unit
Lock the OPC unit (left)
Chapter 3 - Maintenance tasks - Level 2 65
Océ VarioPrint 6000 line