Oce VarioPrint 6000 MICR series, User Manual Operating Information

Page: 94 / 264

Select a different media for a job
Introduction
If you want to print a job on other media than originally defined for that job, you can
select a different media via the operator panel. Requirements regarding the new media:
• The media must be available in the 'Media catalog'.
• The media must have the same size as the original media.
Note:
You cannot change this setting for the active print job .
How to select another media for a job
1.
Touch 'Jobs' -> 'Queues' -> 'Scheduled jobs' or 'Waiting jobs'.
2.
Touch the job you want to change.
3.
Touch 'Properties' - or touch the job 2x to open the 'Properties' window.
4.
In the preview pane at the right-hand side, touch the media you want to change.
When more than 1 media was defined for a job, the preview pane displays a separate
button for each media.
5.
From the list, select the new media.
6. Press 'OK'.
Chapter 5 - Working with the operator panel 94
Select a different media for a job