Oce VarioPrint 6000 MICR series, User Manual Operating Information

Page: 77 / 264

Change the number of sets
Introduction
When a job is sent to the machine, the desired number of sets will be indicated. However,
you can change the number of sets on the operator panel.
This section describes how to change the number of sets for a specific job.
Note:
You can enter any value between 1 and 65,000 for all jobs except the active print job .
To change the number of sets for the active print job , you must first press the Hold
key 1 time. Then you can change the number of sets. You cannot define a lower value
than the number of sets that has already been printed.
Change the number of sets
1.
On the operator panel, press the 'Jobs' button.
2.
In the list of 'Waiting jobs' or 'Scheduled jobs', touch the job you want to edit.
3.
Press 'Properties'.
Note:
You can also press the job 2 times to access the 'Properties' window. This function is
comparable to double-clicking with a mouse.
4.
Touch the 'Number of sets' button.
A numerical keyboard appears.
5.
Use the numerical buttons to enter the desired number of sets.
Note:
Touch the arrow button <- to correct the previous entry or press 'Cancel' to close the
numerical keyboard without saving the changes.
6.
Press 'OK'.
The numerical keyboard disappears.
7.
Press 'OK'.
Chapter 5 - Working with the operator panel 77
Change the number of sets