Oce VarioPrint 6000 MICR series, User Manual Operating Information

Page: 36 / 264

The paper modules
Introduction
The paper trays contain the media that are required for the print jobs. The default con-
figuration of the machine contains 1 paper module with 4 paper trays. You can add 1 or
2 more paper modules to the machine. Then the total number of paper trays is extended
to 8 or 12 respectively. You can find more information about the capacities of the paper
trays and the supported media size in the appendix of this manual.
This section describes the control panel on each paper module.
Note:
You can use the control panel on the paper modules to open the paper trays and load
the media. However, the recommended way to open the paper trays and assign the media
is via the 'Schedule' view. You can also open the paper trays and/or assign the media via
the 'Trays' view (see
‘Assign the media to a paper tray’ on page 99 ).
Illustration
1
2
3
4
1
2
3
4
1 3
2
5
4
[14] The control panel on the paper modules
The control panel
Each paper module contains a control panel next to the upper paper tray. The control
panel consists of 4 sections that correspond with the 4 paper trays. Each section displays
the current filling level of the corresponding paper tray. Furthermore, the control panel
indicates whether the media in the paper tray is assigned or not. The following table de-
scribes the various parts of the control panel.
Chapter 4 - Overview of the system components 36
The paper modules