Oce VarioPrint 2090, User Manual

Page: 84 / 187

84 Océ VarioPrint 2090 User manual
Illustration
[20] Edit a mailbox job
[20] Edit a mailbox job
How to edit a mailbox job
1
Open the mailbox to access your print job (see ‘Print a job from the mailbox’
on page 81).
2
Press the function key 'Edit...'.
The job editor opens with the settings of the initial mailbox job.
3
If necessary, follow the procedures described below.
These procedures help you to change the values of the print job settings.
Change the settings in the 'Basic' section
1
Press the function key 'Basic' (only necessary if the section is not displayed
after you pressed the function key 'Edit...').
[21] The 'Basic' section
[21] The 'Basic' section
2
Press the function key 'Print'.
You can define that the print is '1-sided' or '2-sided'.
3
Press the function key 'Staple'.
You can set the number of staples. Select 'No staple', '1 staple' or '2 staples'
for the print job.
Note:
The 'Print job identification' section displays the file name and the user
name. You can not change this information for a print job.