Oce VarioPrint 2090 User Manual Download Page 39

Page: 39 / 187

Turn on and off the system

Restart the system

Introduction

Task for key operators, system administrators

When you change settings in the Océ Settings Editor, the software may ask you
to restart the system. A restart activates the new, changed settings.

If you restart the system, the following occurs.

■

The Océ Settings Editor changes become active

■

The jobs in the mailbox are saved

■

The job number of new copy jobs and scan jobs is set to 1.

You must restart the system in the Océ Settings Editor. Follow the procedure
below to restart the system.

Illustration

[6] Restart the Océ Smart Imager

Summary of Contents for VarioPrint 2090




























































































































































































Search results

Summary of Contents for VarioPrint 2090

Reviews:

Related manuals for VarioPrint 2090

Brands by name

Popular brands

Oce VarioPrint 2090, User Manual

Search results

Summary of Contents for VarioPrint 2090

Reviews:

Related manuals for VarioPrint 2090

Brands by name

Popular brands