Oce VarioPrint 2090, User Manual

Page: 27 / 187

Get to know the Océ VarioPrint 2090 27
Low power mode
When the printer is in low power mode, the power consumption is decreased
to a lower level.
The operator panel on the printer displays a screen saver with the text 'Energy
save mode'.
You can not disable the low power mode.
The system goes in the low power mode in the following situation.
[3] System goes into the low power mode
[3] System goes into the low power mode
The system returns from the low power mode in the following situations.
[4] System returns from the low power mode
[4] System returns from the low power mode
Note:
The system needs 30 seconds to warm up.
When
1 The Océ VarioPrint 2090 was not used for a defined time
Note:
This time is defined in the Océ Settings Editor. The key
operator can set a time between 1 and 240 minutes in steps of 1
minute. The factory default is 15 minutes.
When
1 You press a key on the operator panel
2 You send a print job.
Sometimes the system remains in the low power mode when you
send a print job. This event can occur when the print job is forced
to the mailbox.