Oce VarioPrint 2090 User Manual Download Page 26

Page: 26 / 187

Océ VarioPrint 2090 User manual

The power modes

Introduction

Information for operators, key operators, system administrators

The main power modes of the Océ VarioPrint 2090 are the following.

■

Off

■

Low power mode

■

Sleep mode.

The low power mode and the sleep mode are the energy save modes of the Océ
VarioPrint 2090 .

Note:

The key operator can change the settings in the Océ Settings Editor. The

on-line help in the Océ Settings Editor contains more information about how
to change the settings.

OFF

The Océ VarioPrint 2090 is completely turned off.
You can not reach the system through the network.
You must press the power switch

to turn on the system (see ‘Turn on the

system’ on page 36).

Summary of Contents for VarioPrint 2090




























































































































































































Search results

Summary of Contents for VarioPrint 2090

Reviews:

Related manuals for VarioPrint 2090

Brands by name

Popular brands

Oce VarioPrint 2090, User Manual

Search results

Summary of Contents for VarioPrint 2090

Reviews:

Related manuals for VarioPrint 2090

Brands by name

Popular brands