Oce VarioPrint 2090 User Manual Download Page 152

Page: 152 / 187

152

Océ VarioPrint 2090 User manual

Adjust the paper guides.
The Océ VarioPrint 2090 can identify the paper size, based on the position of
the paper guides.

Note:

You cannot set the paper type on the Océ VarioPrint 2090 . You must

defined the paper types in Océ Intra Logic, the printer driver or another tool.

Close the paper tray.
The plate inside the paper tray moves up again. The LED on the paper tray is
off.

How to lock the paper trays

Press the System information key

The following screen appears.

[56] Lock the paper trays

Press the key for 'System' to select 'Lock trays'.

Press the Start key

All the paper trays are locked.

Summary of Contents for VarioPrint 2090




























































































































































































Search results

Summary of Contents for VarioPrint 2090

Reviews:

Related manuals for VarioPrint 2090

Brands by name

Popular brands

Oce VarioPrint 2090, User Manual

Search results

Summary of Contents for VarioPrint 2090

Reviews:

Related manuals for VarioPrint 2090

Brands by name

Popular brands