Oce VarioPrint 2090, User Manual

Page: 105 / 187

The copy function 105
The settings in the 'Extra' section
[35] The 'Extra' section without 'Sort' option
[35] The 'Extra' section without 'Sort' option
[36] The 'Extra' section with 'Sort' option
[36] The 'Extra' section with 'Sort' option
The following table describes the settings.
[32] The settings in the 'Extra' section
Settings Description
'Sort' ■
'By page'. The output is sorted in the order 111, 222,
333.
■
'By set'. The output is sorted in the order 123, 123,
123.
Note:
The setting is only visible when the key operator
enables the setting 'Display expert settings' in the Océ
Settings Editor. When the setting is enabled, the 'Extra'
section contains 5 settings. Then the graphical feedback
at the left-hand side is not visible.
'Orientation' You can use the setting when you scan the original from
the glass plate and the original is small enough to make
a scan in 2 directions (A3 can only be scanned in 1
direction on the glass plate).
Note:
This setting is read-only for the originals that you
put in the automatic document feeder.