Oce VarioPrint 2050-70, Job Manual

Page: 77 / 174

The print function 77
Extra section
[47] The Extra section
[47] The Extra section
Note:
You can enter the Key operator mode when you open the 'Special
settings' card in the 'Extra' section. The Key operator mode is protected and
requires a password entry.
Card Description of the function
'Copy layout'
■
Definition of the binding of the printed sets: 'Long edge'
or 'Short edge'.
■
The 'Margin shift' function allows you to change the
margin shift for the front and rear pages.
Use the Arrow keys
to set the margin shift from 25
down to - 25 mm.
Check that the increased margin do not result in lost image
information.
'Image
quality' The 'Halftone' setting allows you to adjust the tone of the
grey areas in the image.
Use the Arrow keys
to move the halftone slide to 'Fine' or
to 'Coarse', to change the tone of grey areas.