Oce VarioPrint 2050-70, Job Manual

Page: 62 / 174

62 Océ VarioPrint 2050-70 Job manual
Interrupt a copy job
Introduction
The Interrupt mode allows you to start another job, while a job with many sets
is processed. The procedure to interrupt a job is as follows.
■
The Interrupt key is pressed, to enter the Interrupt mode.
■
The current copy job stops, after the printing of the current set is complete.
The previously digitised information and the job settings are stored in the
machine memory.
■
One or more copy, print or scan jobs can be started.
■
The Interrupt key is pressed, to quit the Interrupt mode.
■
The suspended copy job continues.
Note:
The Key operator can disable the Interrupt mode.
Note:
If a copy charge system or an external finisher is connected to the Océ
VarioPrint 2050-70, the Interrupt mode is not available.
Before you begin
■
You can only enter the Interrupt mode when the Océ VarioPrint 2050-70
processes a job. The message box informs you when the Océ VarioPrint
2050-70 accepts the Interrupt mode request.
How to interrupt a copy job
1
Press the Interrupt key while a copy job is processing.
[37] Press the Interrupt key
[37] Press the Interrupt key