Oce VarioPrint 2050-70, Job Manual

Page: 52 / 174

52 Océ VarioPrint 2050-70 Job manual
How to make an enlarged or reduced copy with the platen
1
Place and align the original face down on the platen.
Follow the feed direction according to the dimensions of the original.
2
Select the 'Copy' mode .
The 'Basic' section opens automatically.
3
Select '1-sided' in the 'Original' and 'Copy' function boxes.
4
Select 'No' in the 'Staple' function box.
5
Activate the 'Paper' section.
Make sure that the 'Paper input' card is open.
6
Select the size and orientation of the required paper in the 'Source' function
box.
The selected size is displayed in the 'Paper' section.
[29] Select the paper size. The enlargement and reduction is not adjusted automatically
[29] Select the paper size. The enlargement and reduction is not adjusted automatically
7
Activate the 'Basic' section.
Adjust the 'Enlargement or reduction'.
The 'Enlargement or reduction rate' is shown in the 'Basic' section.
Use the Arrow keys or to select one of the pre-set values.
[30] Select the enlargement and reduction
[30] Select the enlargement and reduction
8
Select the number of copies.
9
Press the Start key .