Oce VarioPrint 2050-70, Job Manual

Page: 48 / 174

48 Océ VarioPrint 2050-70 Job manual
Copy separate job parts
Introduction
You must sort the set of originals, to make separate job parts, when the set of
originals has more than one original type (see ‘
Prepare the copy job ’ on
page 32 ).
To start a copy job with separate job parts, proceed as follows.
■
Prepare the first job part.
■
Enter the settings, for the required copy.
■
Enter the settings, for the first job part.
■
Press the Combine key .
■
Prepare the next job part.
■
Enter the settings, for the next job part.
■
Press the Combine key .
■
Press the Start key .
Before you begin
■
Inspect the originals and make separate job parts (see ‘ Prepare the copy
job ’ on page 32 ).
How to copy separate job parts
1
Collect the job parts.
2
Place the originals of the first job part, face down in the automatic document
feeder or on the platen.
Follow the feed direction according to the dimensions and orientation of the
information on the originals of the job part.
3
Select the 'Copy' mode .
The 'Basic' section opens automatically.
4
Enter the settings for the required copy.
■
Select '1-sided' or '2-sided' in the 'Copy' function box of the 'Basic' section.
■
Select 'Yes' or 'No' in the 'Staple' function box.
■
Activate the 'Extra' section.
Open the 'Copy type' card.
Keep the setting or change the copy type.
■
Select the number of copies.