Oce VarioPrint 2045-65 NC, Job Manual

Page: 62 / 213

60 Océ VarioPrint 2045-65 NC Job Manual
Print on special material
Introduction
You can use the following material for the print jobs (see ‘ Input trays, output
bins and materials ’ on page 182 ).
■
Paper from the trays.
■
Special material that you place in a tray for the current mailbox job.
■
Special material that you insert in the special feeder for the current mailbox
job.
Make sure that you place the material correctly in the paper trays and special
feeder (see ‘
Add paper to the paper trays ’ on page 166 )(see ‘ Add paper to the
special feeder ’ on page 171 ).
The Key Operator can lock the paper-compartment door or disable the special
feeder. If the special feeder is disabled, you cannot select the special feeder in
the display screen.
Note:
In the Océ VarioPrint 2045-65 NC print command window, initiate a
print job on special material. Address the online help of the Océ VarioPrint
2045-65 NC printer driver for information about the options.
Before you begin
■
Start a mailbox job (see ‘ Start a mailbox job ’ on page 54 )
■
Make sure that the materials have the correct specifications (see ‘ Input
trays, output bins and materials ’ on page 182 ).