Oce VarioPrint 2045-65 NC, Job Manual

Page: 178 / 213

176 Océ VarioPrint 2045-65 NC Job Manual
Correct the errors
Introduction
If an error occurs, the Océ VarioPrint 2045-65 NC stops the processing of a job.
The message box gives information about the following items:
■
The type of error.
■
The origin of the error.
■
The solution to solve the error.
The table below shows the type of errors that can occur.
[119] Call Océ Service to correct an error
[119] Call Océ Service to correct an error
Type of errors Description
Errors that the
user can correct
■
A paper jam.
■
A paper tray is empty.
■
The job settings are incorrect.
■
Not enough memory to complete the job.
Errors that the
system can re-
cover
■
The system can solve some errors, for example
through a restart.
Errors that the
Key Operator
can recover
■
A paper jam in a machine unit that is not accessible
for the user.
■
A user cannot start a job because the user account is
not listed in the accounts database.
■
The job processing fails.
Errors that re-
quire an Océ Ser-
vice call ■
Océ Service corrects the problems that the Key
Operator cannot recover. A message is displayed if
Océ Service has been called.