Oce VarioPrint 2045-65 NC, Job Manual

Page: 160 / 213

158 Océ VarioPrint 2045-65 NC Job Manual
Before you begin
■
To insure that your scan job settings are correct, make a test copy. Make sure
that the settings do not result in lost image information or gray borders.
Making an enlarged or reduced digital document with the automatic document feeder
1
Place and align the originals face down in the automatic document feeder.
Follow the feed direction according to the dimensions and orientation of the
information on the originals.
2
Select the 'Scan' mode .
The 'Workflow' section automatically opens.
3
Select a 'Scan profile' using the arrow keys .
4
Activate the 'Original' section.
Select '1-sided' or '2-sided' in the 'Original' function box.
5
Select the icon in the 'Original type' function box to define the orientation of
the information and the binding edge of the originals.
6
Activate the 'Digital document' section.
Make sure that the 'Page size' card is open.
7
Select the size and the orientation in the 'Size' function box.
Check that the orientation matches the feed direction of the originals.
The enlargement or reduction is automatically adjusted.
[106] Select the size. The enlargement and reduction rate is automatically adjusted
[106] Select the size. The enlargement and reduction rate is automatically adjusted
8
Press the start key .