Oce VarioPrint 2045-65 NC, Job Manual

Page: 149 / 213

The scan function 147
Types of scan job settings
Introduction
The Océ VarioPrint 2045-65 NC has default settings defined by Océ or by the
Key Operator
When you place the originals in the automatic document feeder, some of the
default settings will change according to the detected information. You can
change the settings for your scan job.
Default settings if you use the automatic document feeder
When you place the originals in the automatic document feeder, the Océ
VarioPrint 2045-65 NC proceeds as follows:
Default settings if you use the platen
When you place an original on the platen, the Océ VarioPrint 2045-65 NC
proceeds as follows.
Procedure
Detects the dimensions of the originals and selects the same or the most ac-
ceptable size for the digital document.
Calculates the necessary enlargement or reduction.
Procedure
Does not change the default binding and information-orientation settings.
The dimensions of the original on the platen cannot be detected.
Does not change the default enlargement or reduction.