Oce VarioLink 2650cp Page 267 User Manual Download

Page: 267 / 287

VarioLink 2650cp Series User’s Guide

267

11. The Enter Adjustment Value screen appears.

- View the pull down menus for the Hue (X) and Bright-

ness (Y) values.

- You are finding the available ranges for both Hue (X)

and Brightness (Y).

- The available ranges (values) vary according to color.

12. Use the Sample Color Chart.

- Find the color you want to adjust.
- Locate the desired color within the identified available

ranges (values) from Step 10.

- Find the values for both Hue (X) and Brightness (Y)

13. On the Pallet Color Matching screen, click the color you

want to adjust.
- The Enter Adjustment Value screen appears.
- View the pull down menus for the Hue (X) and Bright-

ness (Y) values.

- Adjust the values for Hue and Brightness to match the

values from Step 11.

cadjust1.jpg

Summary of Contents for VarioLink 2650cp
































































































































































































































































































Search results

Summary of Contents for VarioLink 2650cp

Reviews:

Related manuals for VarioLink 2650cp

Brands by name

Popular brands

Oce VarioLink 2650cp, User Manual

Search results

Summary of Contents for VarioLink 2650cp

Reviews:

Related manuals for VarioLink 2650cp

Brands by name

Popular brands