VarioLink 2650cp Series User’s Guide
120
If paper jams are frequent
• More than one sheet feeds at a time.
• Paper curls.
• Paper feeds at an angle.
Jam is cleared, but printer does not print.
Possible cause
Remedy
The printer is not
horizontal.
Place the printer on a stable, level surface.
The paper is too thin.
Use the correct type of paper. See “Paper (Print
Media)” on page 16.
The paper is moist or
affected by static.
Store paper within specified temperature and
humidity levels. See “Specifications” on
page 112.
The paper is creased
or wrinkled.
Remove the creased / wrinkled paper from the
feed tray.
The paper is not
aligned correctly.
Adjust tray or manual feed guides.
Paper doesn’t feed.
Correct paper feed selection in the Properties
Setup tab in the printer driver.
Possible cause
Remedy
The top cover has
not remained open
until all paper jams
have been cleared.
Removing a paper jam is not sufficient:
Raise and gently lower the top cover, especially
if the paper jam has been removed from behind
the front cover.
