Oce TDS300, User Manual

Page: 39 / 132

Use the Océ TDS300 to copy 39
The keys
The Extra key
This key allows you to enter the Extra mode of the scanner and
return to the normal mode. Set the properties for the original and for the
scanner in the Extra mode.
The Browse keys (left
,
right )
Move in one level of the menu structure as
the display shows. Browse the preset zoom values.
The Browse keys (up , down )
Move between the levels of the menu
structure as the display shows. Adjust the zoom value with an accuracy of 1
percent.
The Confirm key
Confirm the current setting in the menu structure. If you
press the confirm key a second time in the current menu item, you restore the
previous setting.
The Strip key
Press this key to add or to remove a ‘leading’ or a ‘trailing’ strip.
The icon flashes. Use the browse keys
(left
,
right , up , down )
to change
the value. The icon remains on if you press another settings key and select a
different value than the default value.
The Cancel key
Press this key one time to set the copy counter to the default
value. Press this key twice to change all settings to their default values. The
scan stops if you press this key.
The - and + keys
Change the number of copies.
The Start key
Press the green start key to start the scan or to restart the
copy process.
The Zoom key
Enters the zoom mode. The icon flashes. Use the browse keys
(left
,
right ) to browse the preset zoom values. Use the browse keys (up ,
down ) to adjust the zoom value with an accuracy of 1 percent.
The Exposure key
enters the exposure mode. The icon flashes. Use the browse
keys to change the exposure value.
The Media key
Select roll 1, roll 2 or manual feed. The equivalent icon is on.