Oce TDS300, User Manual

Page: 32 / 132

32 Océ TDS300 User Manual
Paper series
You must enter the paper series that you use in the printer. Choose between:
■
DIN
■
DIN CARTO
■
Only 8.5 inch
■
Mix 8.5/9 inch
▼
To set a paper series
1
Press the On-line key to put the printer off-line.
2
Select the ‘Configuration’ item with the or key.
3
Press Next/select to enter the ‘Configuration’ menu.
4
Select ‘Paper series’ with the or key.
5
Press Next/select to enter the ‘Paper series’ menu.
6
Select the required paper series with the or key.
7
Press Next/select to confirm.
8
Press On-line to put the printer on-line again.
Clear set memory
The set memory indicates the available memory. If an error occurs, for example
the set memory reaches its limits, you must clear the set memory.
▼
Clear set memory
1
Press the On-line key to put the printer off-line.
2
Select the ‘System
’
item with the or key.
3
Press Next/select to enter the ‘System’ menu.
4
Enter the password to get access.
5
Select the ‘Clear setmem’ item with the or key.
6
Press Next/select to enter the ‘Clear setmem’ menu.
7
Select ‘Yes’ or ‘No’ with the or key.
8
Press Next/select to confirm the setting.
9
Press On-line to put the printer on-line again.
10
Turn ‘off’ and ‘on’ the controller.
Diagnostic mode
The Diagnostic mode is only meant for the Océ service technician.