Oce PP18C Operation Manual Download Page 41

Page: 41 / 150

Using the Operator Panel

ADVANCED OPERATION GUIDE

2-15

Status Pages

This section explains the procedure for printing the status pages. The
status page is a list of parameters and settings for most basic printer
configurations. You may be required to produce a status page when
requesting service to the printer.

Printing a Status Page

You can check the printer’s current status, including available memory
space and option settings by printing a status page.

Press

[MENU]

Press

repeatedly until

Status Page

appears.

Press

[OK] ([ENTER])

. A question mark (

)

appears.

Press

[OK] ([ENTER])

again. The message

Processing

appears and

the printer prints a status page.

For a sample status page and its full description, see

Understanding the

Status Page on page 2-16.

Status Page

Status Page ?

Summary of Contents for PP18C























































































































































Search results

Summary of Contents for PP18C

Reviews:

Related manuals for PP18C

Brands by name

Popular brands

Oce PP18C, Operation Manual

Search results

Summary of Contents for PP18C

Reviews:

Related manuals for PP18C

Brands by name

Popular brands