Oce PlotWave 750, Safety Manual

Page: 6 / 21

Safety information (all countries)
Introduction
All the products have been tested in accordance with the strictest international safety standards.
Please read the following sections before you connect the machine to the power supply. These
sections contain important information with regard to the user safety and the prevention of
equipment problems. Make sure that you observe the safety rules hereinafter. This helps to
assure that you can work with the product/system safely. Make sure that you observe all the
precautions mentioned below.
NOTE
Depending on the context, the terms: system, machine, and equipment all will be used to
designate the Océ product for which this user documentation is applicable.
Some parts of the contents of this section may not be applicable to your product.
Please refer to the corresponding Safety Data Sheets for specific safety information. You can
download the Safety Data Sheets from the support site of your product at "http://global.oce.com/
support/"
Warning and caution indicators (manual)
The following indicators are used in the manuals to categorize the level of the seriousness of
hazard:
WARNING
Indicates a warning concerning operations that may lead to death or injury to persons if not
performed correctly, To use the machine safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to persons if not performed
correctly. To use the machine safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read these items carefully to
operate the machine correctly, and avoid damage to the machine or property.
NOTE
Indicates a clarification of an operation or contains additional explanations for a procedure.
Reading these notes is highly recommended.
NOTICE: Indicates an operation that must not be performed. Read these items carefully and make
sure not to perform the described operations
Warning and caution indicators (machine)
The following indicators are used in the machine to warn the user of possible safety risks:
Safety information (all countries)
6 Chapter 1 - Safety information