Oce PlotWave 750, Safety Manual

Page: 18 / 21

General information
Caution labels and notations (All countries)
• The power-marking label is located near the mains entrance. If connection to a different mains
voltage is required, contact Customer Service.
• Do not remove caution labels or caution notations. If a label or notation is soiled, please clean
the label or notation. If you cannot make label or notation legible, or if the label or notation is
damaged, please contact your service representative.
Space requirements and operation precautions (All countries)
• The required operating space of this product will be communicated to each customer by the
local sales representative during the Site Survey.
• Please refer to the corresponding Safety Data Sheets for specific safety information, including
the dimensions of the product, the recommended room volume and ventilation rate. You can
download the Safety Data Sheets from the support site of your product at
"http://
global.oce.com/support/"
.
Operating environment (All countries)
• The environmental requirements for correct operation of the machine are as follows:
Operating temperature (T): 20°C (68°F) to 27°C (80,6 °F)
Relative Humidity (RH): 30% to 60%
Deployment area: below 2000 m (approx. 6500 ft) altitude and non tropical (China only):
•
Translation: Can only be safely used at altitudes below 2000 meters (approx. 6500 feet).
•
Translation: Can only be safely used in non tropical weather.
General information
18 Chapter 3 - General information