Oce plotwave 345 Operation Manual Download Page 56

Page: 56 / 300

Restore the factory defaults

Introduction

Sometimes you want to go back to the initial settings. You can restore the factory default settings
in Océ Express WebTools.

NOTE

Administrator to only restore the System Administrator settings. To restore all the factory

default settings you must log in as a Power User.

Procedure

Open the [Configuration] tab, or the [Preferences] tab.

Click on [Restore defaults] in the upper right-hand corner of the screen. A window opens.

Click [Ok] to restore the factory default settings, or [Cancel] to close the window without restoring
the factory defaults.

Restore the factory defaults

Chapter 3 - Define your Workflow with Océ Express WebTools

Summary of Contents for plotwave 345













































































































































































































































































































Search results

Summary of Contents for plotwave 345

Reviews:

Related manuals for plotwave 345

Brands by name

Popular brands

Oce plotwave 345, Operation Manual

Search results

Summary of Contents for plotwave 345

Reviews:

Related manuals for plotwave 345

Brands by name

Popular brands