Oce plotwave 345 Operation Manual Download Page 101

Page: 101 / 300

Enable or disable scan templates

Introduction

You can enable or disable scan templates. When you enable the templates they become available
on the user panel.

Procedure

Open the [Preferences] - [Scan] tab.

Under Actions, click on the [Edit a template] icon next to the preferred template. The template
window opens.

Under [File], set the [Display on the user panel] setting to [Yes] or [No].

Click on OK to confirm your entry.

Result

When you have selected [Yes] the templates are available on the user panel in the Smart Access.

NOTE

The default scan template is always available in the Smart Access of the user panel, even when
it is disabled.

Enable or disable scan templates

Chapter 3 - Define your Workflow with Océ Express WebTools

101

Summary of Contents for plotwave 345













































































































































































































































































































Search results

Summary of Contents for plotwave 345

Reviews:

Related manuals for plotwave 345

Brands by name

Popular brands

Oce plotwave 345, Operation Manual

Search results

Summary of Contents for plotwave 345

Reviews:

Related manuals for plotwave 345

Brands by name

Popular brands