Oce Perfect Binder-C1, User Manual

Page: 28 / 82

Make a perfect-bound book
Introduction
The perfect binder is an optional finisher. This finisher enables you to create a perfect-
bound book.
Before you begin
Load the media for the body sets and, if needed, the covers.
Note:
Perfect binding is only available for print jobs, not for copy jobs.
Note:
Perfect binding can only be applied to a job via job preparation software like the driver,
PRISMAprepare, or other job preparation applications.
Note:
On the operator panel perfect binding can only be disabled for a job, but can not be
enabled for a job.
Make a perfect-bound book
1.
Define the book that you want to be perfect-bound, via the driver, PRISMAprepare, or
other job preparation applications.
2.
Send it to the printer.
3.
Change job properties, if needed.
Note:
You are only allowed to change the trimming, or the used paper (but not the paper size).
See the manual of the printer how to change these properties.
And of course you can disable perfect-binding in the job properties.
4.
Print the perfect-bound book.
Chapter 4 - Basic operations 28
Make a perfect-bound book