Oce im7520, User Manual, Page: 68 / 459

3 Transmission
3-8 im7520/im6020
Trans
m
ission
Ch
ap
te
r 3
3.2.4 Transmitting Originals by Using both the ADF and the Plat-
en Glass
You can scan originals by using both the ADF and the platen glass and you
can also scan the large amounts of originals by placing them on the ADF in
several times.
Transmitting Originals by Using both the ADF and the Platen Glass
1
If the FAX screen is not displayed, press [Fax] on the control panel to
open the FAX screen.
2
Select a destination.
3
Set the desired functions as necessary.
4
Place the original on the platen
glass. Press [Scan Setting] -
[Separate Scan] - [OK] and then
press [Start].
– Document placed on the ADF
will take precedence over those
on the platen glass.
– For details, see "Placing the
Original on the Machine" on
page 3-5.
5
Place the next original on the ADF or the platen glass and press [Start].
– Repeat this procedure until all originals to be sent have been
scanned.
– Pressing [Change Setting] allows you to change the setting
([Simplex/Duplex], [Frame Erase], [Density], [Original Type]) while
the original is being read.
The scanned originals are stored in memory.