Oce im7520 User Manual Download Page 51 | Manualshive

Page: 51 / 459

Oce im7520 User Manual Download Page 51

Before Use

2

im7520/im6020

2-21

Befo

re Use

Chapter 2

2.7.2

Type of boxes (with no hard disk installed)

When no hard disk has been installed, following boxes can be used.

Box Name

Function

System User
Box

Bulletin Board User Box

This is a box into which documents for perusal are
registered. Documents registered in the bulletin
board user box can be polling transmitted accord-
ing to the polling instruction from the other party.

!

Detail

For details, see "Bulletin" (p. 9-7).

Polling TX User Box

Originals read for the polling transmission are saved
in this box.

!

Detail

For details, see "Polled Transmission" (p.
9-2).

Memory RX User Box

When the Memory RX is set to ON, documents re-
ceived are not printed but saved in this box.

!

Detail

For details, see "Memory Reception" (p.
8-5).

Confidential User Box

Confidential document is saved in this box without
being printed.

!

Detail

For details, see "Utilize a document re-
ceived as Confidential Reception" (p. 8-
2).

Fax Retransmit User Box

A document which could not be transmitted by re-
dialing because the remote station was busy or for
some other reason is saved in this box for a certain
time. The document saved can be transmitted again
either to the same address or after changing to a dif-
ferent address.

!

Detail

For details of the Fax Retransmit User
Box, see "Fax Retransmit User Box" on
page 3-32.

«
...
49
50
51
52
53
...
»

Summary of Contents for im7520












































































































































































































































































































































































































































































Reviews:

No comments