manualshive.com logo in svg

Oce im7520, User Manual, Page: 368 / 459

Share
Download
Oce im7520 User Manual Download Page 368

12

Explanation of Reports and Lists

12-24

im7520/im6020

Expl

anatio

n of Repo

rts and Lists

Chapter 12

12.11 An address Polling Rx Reserved Report

This report is printed out automatically when polling is reserved to one 
destination.

Automatic printout can be set to [ON] or [OFF] with [Timer Reservation TX 
Report] at [Report Settings] of Utility Mode. For details, see "Report Settings" 
on page 11-60.

*

The actual reports may be different from the reports in this manual.

Destination:

Telephone number of destination.

Create time:

The time at which polling is received.

Start Time:

The designated time is shown in the case of timer transmission.

Prints:

The number of pages transmitted is shown.

Summary of Contents for im7520












































































































































































































































































































































































































































































Reviews:

No comments