manualshive.com logo in svg

Oce im7520, User Manual, Page: 360 / 459

Share
Download
Oce im7520 User Manual Download Page 360

12

Explanation of Reports and Lists

12-16

im7520/im6020

Expl

anatio

n of Repo

rts and Lists

Chapter 12

12.7

Sequence Polling Reception Report

The result of polling to multiple destinations is printed out automatically.

Automatic printout can be set to [ON] or [OFF] with [Sequential TX Report] at 
[Report Settings] of Utility Mode. For details, see "Report Settings" on 
page 11-60.

*

The actual reports may be different from the reports in this manual.

Destination:

The following is shown.
• Destination name when destination name is registered in abbreviat-

ed dialing.

• Telephone number of destination.

Start Time:

The time at which communication started.

Time:

The required time for the communication is shown.

Prints:

The number of pages transmitted.

Summary of Contents for im7520












































































































































































































































































































































































































































































Reviews:

No comments