manualshive.com logo in svg

Oce im7520, User Manual, Page: 244 / 459

Share
Download
Oce im7520 User Manual Download Page 244

10

Registering/Settings

10-30

im7520/im6020

Registering

/Setti

ngs

Chapter 10

Changing the Subject of the E-Mail

The procedure for changing the Subject of the E-Mail is as follows.

1

See "Displaying the Fax Registration Screen" on page 10-2, to display 
the Fax Registration screen.

2

Press [Subject/Text (for E-mail)].

–

In the Utility Mode, it is also possible to enter a number displayed 
in the key through the keypad for selection. In the case of 
[Subject/Text (for E-mail)], enter the "4" on the keypad.

3

Press [Subject].

4

Select the Subject you want to change and then press [Edit].

–

Pressing 

 or 

 allows you to change the page to be 

displayed.

Summary of Contents for im7520












































































































































































































































































































































































































































































Reviews:

No comments