manualshive.com logo in svg

Oce im7520, User Manual, Page: 201 / 459

Share
Download
Oce im7520 User Manual Download Page 201

Useful Functions for Reception

8

im7520/im6020

8-7

Useful 

Functions for Reception

Chapter 8

8.2.2

Deleting a Document Held in Memory

Deleting a Document Held in Memory

Perform the following procedure to delete the document received and held 
in memory.

1

Press [Box] on the control panel to view the Box screen, if it is not 
already displayed.

2

When an optional hard disk is installed, select [System User Box] tab.

3

Press [Memory RX User Box].

4

Enter the password and press [OK].

–

To interrupt operation, press [Cancel].

–

If you press [C] (clear), the information you have entered will be 
deleted.

5

Select the received document using 

 or 

 and press [Delete].

6

Press [Yes] on the displayed confirmation screen.

The designated document will print.

!

Detail 

To interrupt operation, press [Close] before pressing [Print].

Pressing [Proof Print] lets the first page in the selected file be printed out, 
allowing you to confirm the contents.

Summary of Contents for im7520












































































































































































































































































































































































































































































Reviews:

No comments